torque

常见例句

• The error torques include mass unbalances, compliances, bias torque, etc.
  误差力矩包括质量不平衡, 柔性, 偏置力短, 等等.
• The pendulum - torque type of erector is extensively employed on gyro verticals.
  陀螺垂直器上广泛地采用由摆和力矩马达组成的修正装置.
• The torque of the couple is intimately associated with a couple.
  力偶矩与力偶密切相关.
• Carlson etc. Analysis of Torque Ripple due to Phase Commutation in Brushless dc Machines.
  张琛.直流无刷电动机原理及应用.北京:机械工业出版社,1996.
• The three major forces involved in valve actuation are thrust, torque and rimpull.
  决定阀门操作的力主要有三种:推力, 扭矩和边缘拉力.
• Speed control of direct torque controlled ( DTC ) induction motor drives depends on effectively establishing the stator flux.
  直接转 矩控制 的感应电动机的速度控制需要有效地建立定子磁通.
• In this case, one wheel may spin freely while the other wheel produces torque.
  在这样的情况下, 一个轮子打转,另一个则产生扭矩.
• A new torque identification strategy of valve electric actuator is proposed.
  提出一种新型阀门电动装置力矩辨识方法.
• The harmonic electromagnetic torque of 5 phase hybrid stepping motors during oscillatory operation is investigated.
  研究了五相混合式步进电动机在振荡状态下的谐波电磁转矩.
• If torque controlled impact wrenches are used how is the applied torque set and monitored?
  如果要使用由转矩控制的装嵌扳手,所用的转矩如何安装和监测?
• Care MUST be taken not torque lead knee when bringing body around.
  当在附近带来身体的时候,照料一定被带不到转力矩领引膝.
• Precise torque repeatability with accurate installations time after time.
  可反复准确安装数次,精确的扭矩值具备一定的可重复性.
• One application of CPLD in the measurement system of motor's torque and speed in this thesis.
  文中介绍了当前飞速发展的可编程逻辑器件在电机转矩转速测试仪中的一种应用.
• In such cases, the lowest output torque should be used in matching valve requirements.
  在这种情况下, 最小输出扭矩应该用来满足阀门的扭矩要求.
• The control of torque and speed variableinduction motor drive can achieve by control of rotor MEMF.
  转矩和速度控制可以通过控制转子运动电动势来实现.
• Direct torque control ( DTC ) is a high performance control method after vector control.
  直接转矩控制 ( DTC ) 是继矢量控制后的一种高性能控制方法.
• Under the main production plant adjustable torque wrenches, the United States patented technologies, Chinese manufacturers.
  下属工厂主要生产可调式扭力扳手, 美国专利技术, 中国制造.
• The flywheel mounts to the engine's crankshaft and transmits engine torque to the clutch assembly.
  飞轮安装在发动机曲轴上,它将发动机的扭矩传递给离合器总成.
• Valve running torque can be calculated utilizing the above formula substituting running thrust for seating thrust.
  利用上列公式,用阀座推力替代运行推力,就可以计算出阀门的运行扭矩.
• The paper describes how to calculate the torque of concentrated brushlessmotor by using the energy method.
  通过实例计算,本文还比较了整数槽绕组和分数槽绕组产生谐波转矩的情况,采用分数槽绕组可以削弱谐波脉动转矩.
• The hand must withstand torque of up to 30 Ncm.
  指针须承受30牛顿厘米以上的转动扭力.
• The causes of excessive high oil temperature in practical work process of torque converter of loader.
  分析了装载机液力变矩器在实际工作过程中油温过高的种种原因.
• Motor start torque performance is indicated by the motor's Locked Rotor Torque ( LRT ) figure.
  电机起动扭矩性能是由电机的锁定转子扭矩 ( LRT ) 图表示的.
• Testers work both clockwise and counterclockwise, so you can easily measure torque while tightening and loosening pieces.
  扭力测试仪可顺时针或逆时针测量扭力, 因此可方便地测量扭紧和扭松时的扭力.
• OEM products include Torque Sensors, Reinforcement of Computer, Standard chassis, automated production line and other products.
  代工产品包括扭矩传感器 、 加固计算机 、 标准机箱机柜 、 自动化生产流水线等产品.
• Precision manufacturing techniques ensure uniformity in the torque pattern of the locking element.
  精密的制造技术确保锁紧元件扭转方式的一致性.
• Knowledge and experience is preferred acquisition for physical test including strain, torque, force, pressure, temperature etc.
  希望具备物理量测量的知识和经验,如应变 、 扭矩 、 力 、 压力 、 温度等.
• Torque reading is simpale and accurate because torque is displayed on a clear digital display.
  在峰值保持功能时能显示测得的最大值并保持显示.
• External torques arise from outside the system.
  外转矩是由系统外部生产的.
• The cage is connected by a spindle to the torque spring and pointer.
  用销子将其骨架结构与转矩弹簧和指针连接.
• The total internal torque in any system is equal to zero.
  任何一个系统,其总内转矩等于零.
• Speed control of direct torque controlled ( DTC ) induction motor drives depends on effectively establishing the stator flux.
  直接转 矩控制 的感应电动机的速度控制需要有效地建立定子磁通.
• As synchronous motors, they are able to combine high torques with low speeds.
  作为同步电机, 他们能输出低速大转矩.
• The harmonic electromagnetic torque of 5 phase hybrid stepping motors during oscillatory operation is investigated.
  研究了五相混合式步进电动机在振荡状态下的谐波电磁转矩.
• If torque controlled impact wrenches are used how is the applied torque set and monitored?
  如果要使用由转矩控制的装嵌扳手,所用的转矩如何安装和监测?
• One application of CPLD in the measurement system of motor's torque and speed in this thesis.
  文中介绍了当前飞速发展的可编程逻辑器件在电机转矩转速测试仪中的一种应用.
• The control of torque and speed variableinduction motor drive can achieve by control of rotor MEMF.
  转矩和速度控制可以通过控制转子运动电动势来实现.
• Direct torque control ( DTC ) is a high performance control method after vector control.
  直接转矩控制 ( DTC ) 是继矢量控制后的一种高性能控制方法.
• Stiffness, ultimate and yield forces ( torques ) were compared using an analysis of variance.
  利用方差分析分析比较刚度 、 临界和屈服应力 ( 转矩 ).
• The paper describes how to calculate the torque of concentrated brushlessmotor by using the energy method.
  通过实例计算,本文还比较了整数槽绕组和分数槽绕组产生谐波转矩的情况,采用分数槽绕组可以削弱谐波脉动转矩.
• Torque arm. To reduce wear on packing rings , to enable better sealing and to reduce torque.
  转矩臂. 有利于减少密封环上的磨损, 改善密封性能,减少扭矩.
• Torque estimation of asynchronous motor by measuring voltages and current of the motor.
  转矩估计的异步电动机通过测量电压和电流的电机.
• The inner loop adopts sliding mode control which can decouple torque and flux.
  内环采用滑动模控制实现了电动机转矩和磁通的解耦.
• This paper presents an estimation method for speed and disturbance torque based on observer theory.
  本文根据观测器理论估测直流马达的转速与干扰转矩.
• The concept of complex torque coefficient was extended to the design of HVDC supplementary controller.
  将复转矩系数法的概念进行了推广,并应用到直流附加阻尼控制器的设计中.
• The coefficient of motor torque fluctuation is a technical parameter for describing stationarity of motor running.
  转矩波动系数是描述电动机运行平稳性的技术指标.
• This torque is a braking torque.
  该转矩称为制动转矩.
• Direct torque control ( DTC ) is a high performance control method.
  直接转矩控制 ( DTC ) 是一种高性能的控制方法.
• Then the problems such as linkage control and the torque regulation are investigated.
  就磁链控制,转矩估算和转矩调节几个问题分别进行了讨论.
• However, their cogging torque or unbalanced radial force is usually high, deteriorating the machine performance.
  但是这种电机的齿槽定位转矩或不对称径向力一般也比较高.
返回 torque